Product ID:ABLEBOND 84-1LMI
MSDS Date:11/15/1988
FSC:8040
NIIN:01-339-8655
MSDS Number: BBPKK

ABLESTIK LABORATORIES

833 W 182ND STREET
GARDENA, CA 90248

Emergency Phone: (213) 532-9341

Info Phone: (213) 532-9341

Cage: 9V874

ABLESTIK LABS SUB OF NATIONAL STARCH AND CHEMICAL

COMPTON, CA 90221 US

Telephone: 310-764-4600

Cage: 21109

SILVER (SARA III)

CAS: 7440-22-4

RTECS: VW3500000

Fraction By Weight: >50%

OSHA PEL 0.01 MG/M3

ACGIH TLV: 0.1 MG/M3; 9192

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

1,4-BUTANE DIGLYCIDYL ETHER, DIEPOXIDE

CAS: 2425-79-8

RTECS: EJ5100000

Fraction By Weight: <10%

AROMATIC AMINE

Fraction By Weight: <5%

LD50 LC50 Mixture:ORAL LD50 (RATS): 1,410 MG/KG
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHALATION: HARMFUL. SKIN: IRRITATION,
SENSITIZATION, & ABSORPTION. EYES: IRRITATION. INGESTION: MODERATE
TOXICITY.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:INHALATION: HARMFUL. SKIN: IRRITATION,
ABSORPTION, & SENSITIZATION. EYES: IRRITATION. INGESTION: MODERATE
TOXICITY.

First Aid:EYES: FLUSH W/PLENTY OF WATER FOR AT LEAST 15 MINS. SKIN:
WASH THOROUGHLY W/SOAP & WATER. INHALATION: REMOVE TO FRESH AIR.
INGESTION: OBTAIN MEDICAL ATTENTION IN ALL CASES.

Flash Point Method:CC
Flash Point:280F
Extinguishing Media:FOAM, CO2, DRY CHEMICAL
Fire Fighting Procedures:WEAR SELF-CONTAINED BREATHING APPARATUS.

Spill Release Procedures:WIPE UP W/SOLVENT SATURATED TOWELING & COLLECT
IN AN APPROPRIATE CNOTAINER FOR DISPOSAL.

Handling and Storage Precautions:STORE REFRIGERATED AT ALL TIMES. VENT
CURING OVEN TO OUTDOORS. AVOID CONTACT W/SKIN, EYES, & CLOTHING.
AVOID INHALATION OF VAPORS.
Other Precautions:IF THIS PRODUCT IS NOT USED FOR THIN BOND LINE
APPLICATION, VIOLENT CHEMICAL REACTION CAN RESULT. PRODUCT SHOULD
BE USED W/CAUTION UPON CURING.

Respiratory Protection:USE NIOSH APPROVED ORGANIC VAPOR RESPIRATOR IS
NEEDED. THE USE OF A NIOSH APPROVED MASK FOR TOXIC DUST IS REQUIRED
IF CURED PRODUCT IS TO BE DRY SANDED OR GROUND.
Ventilation:PROVIDE LOCAL EXHAUST VENTILATION TO KEEP Protective Gloves:RUBBER
Eye Protection:SAFETY GOGGLES W/SIDE SHIELDS
Other Protective Equipment:PROTECTIVE EQUIPMENT TO COVER EXPOSED AREAS.
Work Hygienic Practices:GOOD HOUSEKEEPING IS REQUIRED.
Supplemental Safety and Health

Spec Gravity:3.5
Solubility in Water:INSOLUBLE
Appearance and Odor:SLIVER COLOR, LIGHT PASTE; ESSENTIALLY ODORLESS
Percent Volatiles by Volume:<1%

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS
Stability Condition to Avoid:HEAT PRIOR TO CURE
Hazardous Decomposition Products:ALDEHYDES, CO2, CO

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE W/LOCAL, STATE, &
FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.